KBSGZY Mining Flameproof Substation

KBSGZY Mining Flameproof Substation — Package Substation
Mining

KBSGZY Mining Flameproof Substation

Flameproof mining mobile substation for coal mines and other hazardous mining environments, with explosion-proof enclosure and KBSGZY series transformer.

6 kV or 10 kV200 – 1000 kVA typicalFlameproof
KBSGZY Mining Flameproof Substation — Package Substation

Flameproof mining mobile substation for coal mines and other hazardous mining environments, with explosion-proof enclosure and KBSGZY series transformer.

A mobile substation transformer for mining duty is built for moving faces and hazardous air. This mobile substation transformer uses a dry, flameproof enclosure rather than oil.

How this family is built

Flameproof construction for hazardous areas

The KBSGZY type is the mobile, flameproof substation used in coal mines and other hazardous working environments. The transformer and switchgear are enclosed in an explosion-proof housing so that an internal fault cannot ignite the surrounding atmosphere; the unit is skid-mounted and can be moved as mining faces advance.

Dry transformer and protection

These units use a dry-type transformer rather than oil, which removes the fire and spill hazard underground. Protection follows mining rules — leakage, overcurrent, short-circuit and temperature trips — and the enclosure is built to the applicable explosion-protection standard (GB 3836 series).

Selection points

State the gas hazard group, the incoming voltage (6 or 10 kV), the required kVA rating and the moving method. Because the operating environment is severe, request the explosion-protection certificate and the type-test report for the exact model.

Common models

KBSGZY-500/6, KBSGZY-800/6, KBSGZY-1000/10

Typical parameters

ParameterTypical valueBasis
Electrical
Rated HV voltage6 kV or 10 kV, 3-phase, 50 HzGB 3836; MT/T mining standards
Rated LV voltage0.69 kV / 1.2 kV / 3.3 kV typicalMine distribution voltages
Capacity200 – 1000 kVA typical, per face loadKBSGZY series range
Enclosure typeFlameproof, Ex d I for coal-mine serviceGB 3836.1 / GB 3836.2
HV sideFlameproof cable coupler, interlocked with the switchGB 3836.1
LV sideFlameproof outlet with earth-fault and leakage protectionMT/T mining standards
Mechanical & environment
MobilitySkid-mounted, rail or track transport, relocatable between facesKBSGZY design
CoolingONAN (oil) or AN (dry), sealed tankGB/T 1094
Ambient temperature−20 to +40 °C, relative humidity ≤ 95 %Mine environment
Ingress protectionIP54 on the flameproof enclosureGB/T 4208
Compliance & scope
StandardsGB 3836.1, GB 3836.2, GB/T 1094, MT/T mining standardsNameplate basis
ServiceCoal mine and hazardous mining environment, relocatable between facesProduct scope
MarkingMA mining-product safety mark required for coal-mine useChina MA scheme

Values are the working reference for this family and its standard models. On a project the rating, protection and cable schedule are confirmed against the single-line diagram and the site conditions before the quotation is issued.

Frequently asked questions

QWhat information is needed to specify this item?
A

Send the single-line diagram, rated voltage and current or capacity, short-circuit duty, installation environment, cable or terminal schedule, and any interface dimensions that apply to the item.

QAre the parameters on this page the final project values?
A

No. They are working reference values for the product family. The final model, rating, protection, accessories and scope are confirmed against the single-line diagram and site conditions before quotation.

QWhat is included in the quotation?
A

The quotation identifies the selected configuration, bill of materials, scope of supply and applicable test or document package. Loose accessories and site work are listed separately when applicable.

QCan the item be adapted to a project drawing?
A

Project-specific dimensions, interfaces and accessories can be reviewed against the drawings. Feasibility and the final configuration are confirmed for the selected model before production.

Related systems and items

The five functional systems show what this family is assembled from; send the diagram for a project BOM.

Need this quoted?

Send the single-line diagram and the site conditions. You get back a configuration, a bill of materials and a scope of supply — in writing, at quotation.

Request a quotation
Package Substation

Specialized in package substations, switchgear cabinets and distribution components for global B2B projects. Configuration and bill of materials are fixed against the single-line diagram; assembly, wiring and routine test follow that drawing.

6 / 10 / 35 kV · 100–3150 kVA · IP54+

© 2026 Package Substation. All rights reserved.PrivacyContactmanager@packagesubstation.com
Scroll to Top