
Five Systems Inside Every Substation
High-voltage receiving, transformation, low-voltage distribution, enclosure and auxiliary systems — the five functional blocks a BOM is built from.
Read the substation as five systems
A package substation is not a single product; it is five systems that have to fit one enclosure. Splitting it this way is how we size a BOM — each system maps to a group in the BOM library.
HV System
High-voltage incoming and distribution: ring main units / MV switchgear, load switches, vacuum circuit breakers, HV fuses, surge arresters, CT, PT, live indicators and distribution automation terminals (FTU/DTU).
Read more →Transformer System
The core power-transforming unit of the package substation: a dry-type (SCB), oil-immersed (S11/S13) or amorphous-alloy (SH15) transformer, supplied complete with temperature controller and cooling fans (dry-type) or Buchholz relay and oil-level gauge (oil-immersed). Typical capacity 315-1250 kVA.
Read more →LV / Distribution System
Low-voltage switchgear and outgoing feeder circuits: LV switchboard (GGD/GCS/MNS), ACB (CW1), MCCB (CM1), disconnectors, ATS, LV CT, multifunction meter and SPD, plus the capacitor compensation cabinet for reactive-power correction.
Read more →Enclosure & Structure
Factory-built enclosure that houses the HV, transformer and LV compartments: steel / stainless-steel / GRC cabinet with thermal insulation, ventilation louvers, moisture-proofing, base frame and cable basement. Delivered complete as one assembly.
Read more →Auxiliary Systems
Supporting systems inside the enclosure: anti-condensation heaters and temperature/humidity controllers, interior lighting and maintenance sockets, ventilation fans / air conditioning, fire suppression, grounding and security monitoring. Mostly standard industrial fittings specified per project.
Read more →The five images on this page are product photographs of the equipment represented by each system; model numbers and ratings are still confirmed against the single-line diagram.
The five systems, side by side
| Parameter | Typical value |
|---|---|
| HV system | RMU / withdrawable switchgear, load switch, VCB, fuse, arrester, CT/PT, FTU/DTU |
| Transformer | Dry-type SCB, oil-immersed S11/S13 or amorphous SH15; 100–1600 kVA |
| LV system | GGD / GCS / MNS board, ACB, MCCB, ATS, LV CT, meter, SPD, compensation |
| Enclosure | Steel / stainless / GRC cabin, three compartments, insulation, louvers, base frame |
| Auxiliary | Heater + controller, ventilation or A/C, lighting, sockets, fire suppression, earthing |
One row per system is how the BOM is checked line by line; the BOM library holds the item-level detail behind each row.
Why the split matters at enquiry stage
Most scope mistakes happen at the boundary between systems: the CT ratio that does not match the meter, a protection degree that only covers the enclosure, or an LV board ordered without the cable-termination space it needs. Reading the five systems together is the cheapest way to avoid it.
Frequently asked questions
QWhat are the five systems in a package substation?
High-voltage receiving, the transformer, low-voltage distribution, the enclosure and structure, and the auxiliary systems. Every item in the BOM Library belongs to one of these five groups.
QWhy split a substation into five systems?
Because scope errors happen at the boundaries — a CT ratio that does not match the meter, or an LV board ordered without cable-termination space. Splitting the systems makes those boundaries visible before the order.