Capacitor Compensation Cabinet (Whole Cabinet)

Capacitor Compensation Cabinet (Whole Cabinet) — Package Substation
Whole Procured Assemblies

Capacitor Compensation Cabinet (Whole Cabinet)

Automatic reactive-power compensation cabinet supplied complete by the compensation manufacturer – capacitors, reactor and controller are integrated.

400 V30 kvar per stepPer compensation schemeReactive compensation
Capacitor Compensation Cabinet (Whole Cabinet) — Package Substation

Automatic reactive-power compensation cabinet supplied complete by the compensation manufacturer – capacitors, reactor and controller are integrated.

This item is specified against the single-line diagram and the site conditions; the common models and the parameter table below are the working reference, not a catalogue selection.

Compact Substation Components — what this item does

Why these are bought as complete assemblies

Whole assemblies — the cabin, transformer, ring main unit, withdrawable switchgear, LV board and compensation cabinet — are procured as complete, factory-tested objects rather than as loose parts. The manufacturer integrates the internal devices and issues the type-test and routine-test documentation, which keeps responsibility with one supplier and shortens site assembly.

What to check on a complete assembly

Confirm the rated voltage and current, the short-circuit withstand, the protection degree, the applicable standard and the interface drawing. For the transformer, state the winding type, loss level and vector group; for switchgear, state the breaking capacity and the operating mechanism.

Common models

GGJ (LV reactive compensation cabinet), BSMJ0.4-30-3 self-healing capacitor, JKW5C power factor controller

Typical parameters

ParameterTypical valueBasis
Electrical
Rated voltage400 V (LV) / 10 kV (HV)GGJ datasheet
Step size30 kvar per step (BSMJ0.4-30-3)BSMJ model code
Total capacityPer compensation schemePer SLD
Series reactor7 % typical, tuned to the dominant harmonicDetuned compensation practice
ControllerJKW5C power-factor controller, steps per schemeGGJ datasheet
SwitchingCapacitor-duty contactors with damping reactorsProduct design
Mechanical & environment
DischargeDischarge resistors, ≤ 50 V within 3 min after disconnectionGB/T 12747
Ingress protectionIP30 indoor cabinetGB/T 4208
Ambient temperature−5 to +40 °C, ventilatedGB/T 7251.1
MountingFloor-standing cabinet, front accessProduct design
Compliance & scope
StandardsGB/T 3984, GB/T 12747, IEC 60831Nameplate basis
Typical useReactive-power compensation at the LV main busbarProduct scope

Values are the working reference for this family and its standard models. On a project the rating, protection and cable schedule are confirmed against the single-line diagram and the site conditions before the quotation is issued.

Frequently asked questions

QWhat information is needed to specify this item?
A

Send the single-line diagram, rated voltage and current or capacity, short-circuit duty, installation environment, cable or terminal schedule, and any interface dimensions that apply to the item.

QAre the parameters on this page the final project values?
A

No. They are working reference values for the product family. The final model, rating, protection, accessories and scope are confirmed against the single-line diagram and site conditions before quotation.

QWhat is included in the quotation?
A

The quotation identifies the selected configuration, bill of materials, scope of supply and applicable test or document package. Loose accessories and site work are listed separately when applicable.

QCan the item be adapted to a project drawing?
A

Project-specific dimensions, interfaces and accessories can be reviewed against the drawings. Feasibility and the final configuration are confirmed for the selected model before production.

Need this quoted?

Send the single-line diagram and the site conditions. You get back a configuration, a bill of materials and a scope of supply — in writing, at quotation.

Request a quotation
Package Substation

Specialized in package substations, switchgear cabinets and distribution components for global B2B projects. Configuration and bill of materials are fixed against the single-line diagram; assembly, wiring and routine test follow that drawing.

6 / 10 / 35 kV · 100–3150 kVA · IP54+

© 2026 Package Substation. All rights reserved.PrivacyContactmanager@packagesubstation.com
Scroll to Top