Package Substation Types

Six Product Families, One Engineering Route — Package Substation
Package Substation

Six Product Families, One Engineering Route

European, American, new-energy, mining and landscape substations — each quoted against a single-line diagram, never sold from a catalogue.

10 / 6 / 0.4 kV100–1600 kVAIP54+GB/T 17467

The six families

Almost every enquiry is settled by two inputs before a part number is discussed: the voltage class and the installation environment. The families below cover the cases that come up most often. Each page gives common models and typical parameters; the BOM library shows what is procured inside.

YB Series Box-type Substation — Package Substation

YB Series Box-type Substation

European-style prefabricated substation with separate HV, transformer and LV compartments. Convenient for maintenance, widely used in urban distribution.

Read more →
ZGS Pad-mounted Substation — Package Substation

ZGS Pad-mounted Substation

American-style pad-mounted substation with transformer immersed in oil and fuse protection. Compact and cost-effective for residential and commercial loads.

Read more →
XGF New-energy Step-up Substation — Package Substation

XGF New-energy Step-up Substation

Step-up / grid-connection package substation for PV plants and wind farms. Integrates HV switchgear, transformer and monitoring.

Read more →
KBSGZY Mining Flameproof Substation — Package Substation

KBSGZY Mining Flameproof Substation

Flameproof mining mobile substation for coal mines and other hazardous mining environments, with explosion-proof enclosure and KBSGZY series transformer.

Read more →
Huashi Box-type Substation — Package Substation

Huashi Box-type Substation

Chinese-style box-type substation integrating the HV switchgear, transformer and LV distribution equipment in a compact outdoor enclosure for urban and industrial distribution.

Read more →
Landscape Buried Box Substation — Package Substation

Landscape Buried Box Substation

Buried box substation designed to blend into parks, residential areas and commercial landscapes, with the main equipment installed below ground and only a compact landscaped cabinet visible above ground.

Read more →

How a configuration is fixed

A package substation design is a single-line diagram turned into a set of compartments. The HV section, transformer and LV board are selected separately, then assembled into one enclosure. The useful reference is the five functional systems; the deciding numbers are rated voltage, kVA, protection degree and the standard the project will be audited against.

ParameterTypical value
Rated HV10 / 6 kV typical
Rated LV0.4 kV
Capacity100–1600 kVA
ProtectionIP54+
StandardGB/T 17467, IEC 62271-202

Typical values at standard level. Final ratings and type-test reports are confirmed at quotation.

Frequently asked questions

QWhat is the difference between European and American box substations?
A

The European type keeps HV, transformer and LV in separate compartments; the American type integrates them in one tank. The European layout is easier to maintain compartment by compartment, while the American layout is more compact.

QHow many product families are there?
A

Six: YB box type, ZGS pad-mounted, XGF new-energy step-up, KBSGZY mining flameproof, Huashi box type and the landscape buried substation. Each family is quoted against a single-line diagram.

QCan a package substation be relocated?
A

Yes. Because it is a factory-built assembly on a base frame, a package substation can be moved and re-commissioned more easily than a conventional substation, provided the new site foundation and clearances are prepared.

QHow do I request a quotation?
A

Email the single-line diagram with HV and LV voltage, transformer kVA, protection degree, ambient range, altitude, applicable standard and quantity. A configuration, BOM and scope of supply come back.

QWhy are no prices listed on the site?
A

Because a substation is not a catalogue item. The price depends on the configuration, the site conditions and the standard, so it is prepared against the actual enquiry.

Package Substation

Specialized in package substations, switchgear cabinets and distribution components for global B2B projects. Configuration and bill of materials are fixed against the single-line diagram; assembly, wiring and routine test follow that drawing.

6 / 10 / 35 kV · 100–3150 kVA · IP54+

© 2026 Package Substation. All rights reserved.PrivacyContactmanager@packagesubstation.com
Scroll to Top